EF / EM · Mechanical transmission
Electric Screw Presses
Motor-driven screw presses using mechanical transmission and a speed-controlled switched-reluctance motor. PLC and HMI functions support setting impact energy and displaying machine faults.
EF / EM
Process illustration · not a machine drawing
Reference specifications
Published manufacturer catalogue values for preliminary review. Final specification, availability and delivery scope require written confirmation. Strokes per minute are machine data, not guaranteed line output.
Manufacturer series image
Complete manufacturer technical parameters
| Model | Nominal force (kN) | Permissible force (kN) | Moving-part energy (kJ) | Slide stroke (mm) | Strokes per minute (min⁻¹) | Minimum die height (mm) | Table size, F-B × L-R (mm) | Motor power (kW) |
|---|---|---|---|---|---|---|---|---|
| EF-160 | 1600 | 2500 | 10 | 300 | 30 | 300 | 560*600 | 30 |
| EF-300 | 3000 | 4800 | 30 | 380 | 26 | 430 | 640*700 | 45 |
| EF-400 | 4000 | 6300 | 40 | 400 | 24 | 400 | 750*700 | 55 |
| EF-630 | 6300 | 10000 | 90 | 450 | 20 | 550 | 800*750 | 55×2 |
| EF-1000 | 10000 | 16000 | 160 | 500 | 18 | 600 | 1000*900 | 90×2 |
| EM-1600 | 16000 | 25000 | 280 | 550 | 16 | 750 | 1200*1100 | 132×2 |
| EM-2500 | 25000 | 40000 | 500 | 650 | 14 | 1020 | 1400*1250 | 220×2 |
| EM-4000 | 40000 | 63000 | 1000 | 750 | 11 | 1200 | 1900*1600 | 315×2 |
| EM-6300 | 63000 | 100000 | 1600 | 850 | 8 | 1380 | 2150*1800 | 315×2 |
| EM-8000 | 80000 | 125000 | 2280 | 900 | 8 | 1480 | 2350*2000 | 630×2 |
Source: Qingdao Haoyuan Yiyou official product page, checked 24 October 2026. Values reproduce the published series table; confirm the selected model and final configuration in writing.
Specify your application
Workpiece & process
Provide the material grade, billet and finished-part dimensions, forging sequence and production target.
Equipment & interfaces
Identify the required force and energy, die envelope, handling arrangement, power supply and installation country.
Technical review
What is included in the proposed supply?
The technical proposal will define the machine, tooling interfaces, controls, documentation and agreed options.
Can automation be included?
Share the process layout and target cycle. Handling, heating, lubrication and safety interfaces must be reviewed as a system.
Which documents should I request?
Request a model-specific datasheet, general arrangement, foundation and utility requirements, acceptance-test plan and applicable conformity documents.