GF / GM · High energy
Clutch-type High-energy Screw Presses
Clutch-type screw presses combining flywheel energy storage and a controlled return arrangement. Final series designation and configuration require a model-specific technical review.
GF / GM
Process illustration · not a machine drawing
Reference specifications
Published manufacturer catalogue values for preliminary review. Final specification, availability and delivery scope require written confirmation. Strokes per minute are machine data, not guaranteed line output.
Manufacturer series image
Complete manufacturer technical parameters
| Model | Nominal force (kN) | Effective deformation energy (kJ) | Strokes per minute (min⁻¹) | Maximum slide stroke (mm) | Minimum die height (mm) | Table dimensions (mm) | Main motor power (kW) |
|---|---|---|---|---|---|---|---|
| GF-300 | 3000 | 40 | 30-40 | 350 | 400 | 650×570 | 18 |
| GF-400 | 4000 | 60 | 30-40 | 380 | 500 | 800×690 | 22 |
| GF-630 | 6300 | 100 | 30-35 | 400 | 540 | 900×690 | 30 |
| GF-1000 | 10000 | 220 | 25-35 | 450 | 600 | 1000×900 | 45 |
| GF-1600 | 16000 | 420 | 20-30 | 425 | 650 | 1250×1000 | 90 |
| GF-2500 | 25000 | 750 | 28 | 500 | 900 | 1450×1400 | 132 |
| GF-4000 | 40000 | 1200 | 20 | 625 | 900 | 2200×1600 | 180 |
| GF-8000 | 80000 | 2600 | 20 | 700 | 900 | 2400×1800 | 360 |
| GF-10000 | 100000 | 4500 | 18 | 700 | 900 | 2600×2000 | 260×2 |
| GF-12500 | 125000 | 5800 | 18 | 900 | 1100 | 2800×2200 | 320×2 |
Source: Qingdao Haoyuan Yiyou official product page, checked 24 October 2026. Values reproduce the published series table; confirm the selected model and final configuration in writing.
Manufacturer naming note: the page describes GF and GM series, while its parameter-table headers use GF model codes throughout. Those published codes are retained here without relabelling.
Specify your application
Workpiece & process
Provide the material grade, billet and finished-part dimensions, forging sequence and production target.
Equipment & interfaces
Identify the required force and energy, die envelope, handling arrangement, power supply and installation country.
Technical review
What is included in the proposed supply?
The technical proposal will define the machine, tooling interfaces, controls, documentation and agreed options.
Can automation be included?
Share the process layout and target cycle. Handling, heating, lubrication and safety interfaces must be reviewed as a system.
Which documents should I request?
Request a model-specific datasheet, general arrangement, foundation and utility requirements, acceptance-test plan and applicable conformity documents.